Dell PowerEdge VRTX - Manual (Page 133)

Clock Commands 133
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Clock.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
sntp port
The sntp port Global Configuration mode command specifies a SNTP User
Datagram Protocol (UDP) port. Use the no form of this command to use the
SNTP server default port.
Syntax
sntp port port-number
no sntp port
Parameters
• port-number —Specifies the UDP port number used by an SNTP server.
(Range 1–65535).
Default Configuration
The default port number is 123.
Command Mode
Global Configuration mode
Example
The following example specifies that port 321 of the SNTP server is the UDP
port.
console(config)# sntp port 321
show clock
The show clock EXEC mode command displays the time and date from the
system clock.
Syntax
show clock [detail]