Dell PowerEdge VRTX - Manual (Page 370)

370 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
set interface active
Use the set interface active Privileged EXEC mode command to reactivate an
interface that was shut down.
Syntax
set interface active {interface-id}
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active,
but were shut down by the system.
Example
The following example reactivates gi0/1.
console# set interface active gi0/1
show interfaces configuration
Use the show interfaces configuration Privileged EXEC mode command to
display the configuration for all configured interfaces or for a specific
interface.
Syntax
show interfaces configuration [interface-id | detailed ]
Parameters
• interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.