Dell PowerEdge VRTX - Manual (Page 739)

ACL Commands 739
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
mac access-list
Use the mac access-list Global Configuration mode command to define a
Layer 2 access list (ACL) based on source MAC address filtering and to place
the device in MAC Access-list Configuration mode. All commands after this
command refer to this ACL. The rules (ACEs) for this ACL are defined in the
permit ( MAC ) and deny (MAC) commands. The service-acl input command
is used to attach this ACL to an interface.
Use the no form of this command to remove the access list.
Syntax
mac access-list extended acl-name
no mac access-list extended acl-name
Parameters
acl-name—Specifies the name of the MAC ACL (Range: 1–32 characters).
Default Configuration
No MAC access list is defined.
Command Mode
Global Configuration mode
User Guidelines
A MAC ACL is defined by a unique name. IPv4 ACL, IPv6 ACL, MAC ACL
or policy maps cannot have the same name.
Example
console(config)# mac access-list extended server1
console(config-mac-al)# permit 00:00:00:00:00:01 00:00:00:00:00:ff
any