Dell PowerEdge VRTX - Manual (Page 44)

44 Preface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\CLI_Preface_DellPlasma.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
IPv6 Address Conventions
The following describes how to write an IPv6z address, which is a link-local
IPv6 address:
The format is:
%
where:
egress-interface (also known as zone) = vlan | po |
tunnel | port | 0
If the egress interface is not specified, the default interface is selected.
Specifying egress interface = 0 is equal to not defining an egress interface.
The following combinations are possible:
• ipv6_address%egress-interface—Refers to the IPv6 address on the
interface specified.
• ipv6_address%0—Refers to the IPv6 address on the single interface on
which an IPv6 address is defined.
• ipv6_address—Refers to the IPv6 address on the single interface on which
an IPv6 address is defined.
Ctrl+A Moves the cursor to the beginning of the command
line.
Ctrl+E Moves the cursor to the end of the command line.
Ctrl+Z / End Returns back to the
Privileged EXEC
mode from
any mode.
Backspace key Moves the cursor back one space.
Up-arrow key Recalls commands from the history buffer,
beginning with the most recent command. Repeat
the key sequence to recall successively older
commands.
Keyboard Key Description