Dell PowerEdge VRTX - Manual (Page 161)

Template Last Updated - 2/7/2007 Management ACL Commands 161
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
10
Management ACL Commands
management access-list
The management access-list Global Configuration mode command
configures a management access list (ACL) and enters the Management
Access-list Configuration mode. Use the no form of this command to delete
an ACL.
Syntax
management access-list name
no management access-list name
Parameters
name—Specifies the ACL name. (Length: 1–32 characters)
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
Use this command to configure a management access list. This command
enters the Management Access-list Configuration mode, where the denied or
permitted access conditions are defined with the deny and permit
commands.
If no match criteria are defined, the default value is deny.
When re-entering the access-list context, the new rules are entered at the end
of the access list.
Use the
management access-class command to select the active access list.
The active management list cannot be updated or removed.