Arp timeout (interface) – Dell PowerEdge VRTX User Manual
Page 671

IP Addressing Commands
671
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Addressing_MeS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
The default ARP timeout is 60000 seconds, if IP Routing is enabled, and 300
seconds if IP Routing is disabled.
Command Mode
Global Configuration mode
Example
The following example configures the ARP timeout to 12000 seconds.
console(config)# arp timeout 12000
arp timeout (Interface)
Use the arp timeout interface Configuration command to configure how long
an entry remains in the ARP cache for specific interface. Use the no form of
this command restore the default value.
Syntax
arp timeout
seconds
no arp timeout
Parameters
•
seconds
—Time (in seconds) that an entry remains in the ARP cache. It is
recommended not to set it to less than 3600. (Range: 1–40000000).
Default
Defined by the arp timeout Global Configuration command
Command Mode
Interface Configuration mode
User Guidelines
This configuration can be applied only if at least one IP address is defined on
specific interface.