Dell PowerEdge VRTX - Manual (Page 743)

ACL Commands 743
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
service-acl input
Use the service-acl input command in Interface Configuration mode to bind
an access list(s) (ACL) to an interface.
Use the no form of this command to remove all ACLs from the interface.
Syntax
service-acl input acl-name1 [acl-name2] [default-action { deny-any | permit-
any }]
no service-acl input
Parameters
• acl-name—Specifies an ACL to apply to the interface. See the user
guidelines. (Range: 1–32 characters).
• deny-any—Deny all packets (that were ingress at the port) that do not
meet the rules in this ACL.
• permit-any—Forward all packets (that were ingress at the port) that do not
meet the rules in this ACL.
Default Configuration
No ACL is assigned.
Command Mode
Interface Configuration mode (Ethernet, Port-Channel,)
User Guidelines
The following rules govern when ACLs can be bound or unbound from an
interface:
• IPv4 ACLs and IPv6 ACLs can be bound together to an interface.
• A MAC ACL cannot be bound on an interface which already has an IPv4
ACL or IPv6 ACL bound to it.
• Two ACLs of the same type cannot be bound to a port.