Dell PowerEdge VRTX - Manual (Page 562)

562 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
no private-vlan
Parameters
• primary—Designate the VLAN as a primary VLAN.
• community—Designate the VLAN as a community VLAN.
•
isolated—Designate the VLAN as an isolated VLAN.
Default Configuration
No private VLANs are configured.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
• The VLAN type cannot be changed if there is a private VLAN port that is a
member in the VLAN.
• The VLAN type cannot be changed if it is associated with other private
VLANs.
• The VLAN type is not kept as a property of the VLAN when the VLAN is
deleted.
Example
The following example set vlan 2 to be primary vlan:
console(config)# interface vlan 2
console(config-if)# private-vlan primary
private-vlan association
Use the private-vlan association Interface VLAN Configuration mode
command to configure the association between the primary VLAN and
secondary VLANs. Use the no form of this command to remove the
association.