Dell PowerEdge VRTX - Manual (Page 354)

354 802.1X Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
– multi-sessions
• Port Administrated status—The port administration (configured) mode.
Possible values: force-auth, force-unauth, auto.
• Port Operational status—The port operational (actual) mode. Possible
values: authorized or unauthorized.
• Username—Username representing the supplicant identity. This field
shows the username if the port control is auto. If the port is Authorized, it
displays the username of the current user. If the port is Unauthorized, it
displays the last user authorized successfully.
• Quiet period—Number of seconds that the device remains in the quiet
state following a failed authentication exchange (for example, the client
provided an invalid password).
• Silence period—Number of seconds that If an authorized client does not
send traffic during the silence period specified by the command, the state
of the client is changed to unauthorized.
• Tx period—Number of seconds that the device waits for a response to an
Extensible Authentication Protocol (EAP) request/identity frame from the
client before resending the request.
• Max req—Maximum number of times that the device sends an EAP
request frame (assuming that no response is received) to the client before
restarting the authentication process.
• Supplicant timeout—Number of seconds that the device waits for a
response to an EAP-request frame from the client before resending the
request.
• Server timeout—Number of seconds that the device waits for a response
from the authentication server before resending the request.
• Session Time—Amount of time (HH:MM:SS) that the user is logged in.
• MAC address—Supplicant MAC address.
• Authentication success—Number of times the state machine received a
Success message from the Authentication Server.
• Authentication fails—Number of times the state machine received a
Failure message from the Authentication Server.