Dell PowerEdge VRTX - Manual (Page 696)

696 IPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IPv6_Router.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
ICMP error messages limited interval is 100ms; Bucket size is 10
tokens
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
ND advertised default router preference is Medium
Hosts use stateless autoconfig for addresses.
MLD Version is 2
Tunnel mode is manual
Tunnel Local IPv4 address : 10.10.10.1(auto)
Tunnel Remote Ipv4 address : 10.1.1.1
Field Descriptions:
• vlan 1 is up/up—Indicates the interface status: administrative/operational.
•
IPv6 is enabled, stalled, disabled (stalled and disabled are not shown in
sample output)—Indicates that IPv6 is enabled, stalled, or disabled on the
interface. If IPv6 is enabled, the interface is marked “enabled.” If duplicate
address detection processing identified the link-local address of the
interface as being a duplicate address, the processing of IPv6 packets is
disabled on the interface and the interface is marked “stalled.” If IPv6 is
not enabled, the interface is marked “disabled.”
• link-local address—Displays the link-local address assigned to the
interface.
• Global Unicast address(es):—Displays the global Unicast addresses
assigned to the interface. The type is manual or autoconfig.
• Joined group address(es):—Indicates the Multicast groups to which this
interface belongs.
• ICMP error messages—Specifies the minimum interval (in milliseconds)
between error messages sent on this interface.