Dell PowerEdge VRTX - Manual (Page 821)

MLD Snooping Commands 821
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\MLD_Snooping.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
Example
console(config)# ipv6 mld snooping vlan 1 immediate-leave
show ipv6 mld snooping groups
The show ipv6 mld snooping groups EXEC mode command displays the
multicast groups learned by the MLD snooping.
Syntax
show ipv6 mld snooping groups [vlan vlan-id ] [address ipv6-multicast-
address ] [source ipv6-address ]
Parameters
• vlan vlan-id —Specifies the VLAN ID.
• address ipv6-multicast-address —Specifies the IPv6 multicast address.
• source ipv6-address —Specifies the IPv6 source address.
Command Mode
User EXEC mode
Default Configuration
Display information for all VLANs and addresses defined on them.
User Guidelines
To see the full multicast address table (including static addresses), use the
show bridge multicast address-table command.
The Include list contains the ports which are in a forwarding state for this
group according to the snooping database. In general, the Exclude list