Dell PowerEdge VRTX - Manual (Page 281)

RADIUS Commands 281
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Radius.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Parameters
• timeout timeout-seconds —Specifies the timeout value in seconds.
(Range: 1–30).
Default Configuration
The default timeout value is 3 seconds.
Command Mode
Global Configuration mode
Example
The following example sets the timeout interval on all RADIUS servers to 5
seconds.
console(config)# radius-server timeout 5
radius-server deadtime
Use the radius-server deadtime Global Configuration mode command to
configure how long unavailable RADIUS servers are skipped over by
transaction requests. This improves RADIUS response time when servers are
unavailable. Use the no form of this command to restore the default
configuration.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
Parameters
• deadtime —Specifies the time interval in minutes during which a RADIUS
server is skipped over by transaction requests. (Range: 0–2000).
Default Configuration
The default deadtime interval is 0.