Dell PowerEdge VRTX - Manual (Page 769)

Quality of Service (QoS) Commands 769
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Usage
N/A
Command Mode
Policy-map Class Configuration mode.
User Guidelines
Policing uses a token bucket algorithm. CIR represents the speed with which
the token is added to the bucket. CBS represents the depth of the bucket.
Example
The following example defines a policer for classified traffic. When the traffic
rate exceeds 124,000 kbps and the normal burst size exceeds 9600 bytes, the
packet is dropped. The class is called class1 and is in a policy map called
policy1.
console(config)# policy-map policy1
console(config-pmap)#
console(config-pmap-c)# police 124000 9600 exceed-action drop
service-policy
Use the service-policy Interface Configuration (Ethernet, Port-channel)
mode command to bind a policy map to a port/port-channel. Use the no form
of this command to detach a policy map from an interface.
This command is only available in QoS advanced mode.
Syntax
service-policy input policy-map-name
no service-policy input
Parameters
• policy-map-name—Specifies the policy map name to apply to the input
interface. (Length: 1–32 characters)