Dell PowerEdge VRTX - Manual (Page 154)

154 Auto-Update and Auto-Configuration
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Auto-Update.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
boot host auto-update
Use the boot host auto-update Global Configuration mode command to
enable the support of auto update via DHCP. Use the no form of this
command to disable DHCP auto configuration.
Syntax
boot host auto-update
no boot host auto-update
Parameters
N/A
Default Configuration
Enabled by default with the auto option.
Command Mode
Global Configuration mode
User Guidelines
The TFTP protocol is used to download/upload an image file.
Example
Example—The following example enables auto update via DHCP:
console# boot host auto-update
boot host dhcp
Use the boot host dhcp Global Configuration mode command to force
downloading a configuration file at the next system startup. Use the no form
of this command to restore the host configuration file to the default.
Syntax
boot host dhcp
no boot host dhcp