Dell PowerEdge VRTX - Manual (Page 228)

228 Telnet, Secure Shell and Secure Login Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Telnet_SSH_and_Slogin.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
no ip ssh password-auth
Default Configuration
Password authentication of incoming SSH sessions is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command enables password key authentication by a local SSH server of
remote SSH clients.
The local SSH server advertises all enabled SSH authentication methods and
remote SSH clients are responsible for choosing one of them.
After a remote SSH client is successfully authenticated by public key, the
client must still be AAA-authenticated to gain management access to the
device.
If no SSH authentication method is enabled, remote SSH clients must still be
AAA-authenticated before being granted management access to the device.
Example
The following example enables password authentication of the SSH client.
console(config)# ip ssh password-auth
ip ssh pubkey-auth
Use the ip ssh pubkey-auth Global Configuration mode command to enable
public key authentication of incoming SSH sessions.
Use the no form of this command to disable this function.
Syntax
ip ssh pubkey-auth [auto-login]
no ip ssh pubkey-auth