Dell PowerEdge VRTX - Manual (Page 786)

786 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
qos wrr-queue threshold
Use the qos wrr-queue threshold Global Configuration mode command to
assign queue thresholds globally. Use the no form of this command to restore
the default configuration.
This command is only available in QoS advanced mode.
Syntax
qos wrr-queue threshold gigabitethernet tengigabitethernet queue-id
threshold-percentage
no qos wrr-queue threshold gigabitethernet queue-id
Parameters
• gigabitethernet—Specifies that the thresholds are to be applied to Gigabit
Ethernet ports.
• tengigabitethernet—Specifies that the thresholds are to be applied to 10
Gigabit Ethernet ports.
• queue-id—Specifies the queue number to which the tail-drop threshold is
assigned.
• threshold-percentage—Specifies the queue threshold percentage value.
Default Configuration
The default threshold is 80 percent.
Command Mode
Global Configuration mode
User Guidelines
If the threshold is exceeded, packets with the corresponding Drop Precedence
(DP) are dropped until the threshold is no longer exceeded.
Example
The following example assigns a threshold of 80 percent to WRR queue 1.
console(config)# qos wrr-queue threshold gi0/1 80