Dell PowerEdge VRTX - Manual (Page 196)

196 SNMP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
• name value —Specifies a list of names and value pairs. Each name and
value must be a valid string. In the case of scalar MIBs, there is only a
single name-value pair. In the case of an entry in a table, there is at least
one name-value pair, followed by one or more fields.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
Although the CLI can set any required configuration, there might be a
situation where an SNMP user sets a MIB variable that does not have an
equivalent CLI command. To generate configuration files that support those
situations, the system uses snmp-server set . This command is not intended for
the end user.
Example
The following example configures the scalar MIB sysName with the value
TechSupp.
console(config)# snmp-server set sysName sysname TechSupp
snmp trap link-status
Use the snmp trap link-status Interface Configuration mode command to
enable link-status generation of SNMP traps. Use the no form of this
command to disable generation of link-status SNMP traps.
Syntax
snmp trap link-status
no snmp trap link-status
Parameters
N/A