Dell PowerEdge VRTX - Manual (Page 588)

588 IGMP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
User Guidelines
Static Multicast addresses can only be defined on static VLANs.
You can execute the command before the VLAN is created.
You can register an entry without specifying an interface.
Using the no command without a port-list removes the entry.
Example
console(config)# ip igmp snooping vlan 1 static 239.2.2.2
interface gi0/1
ip igmp snooping vlan multicast-tv
Use the ip igmp snooping vlan multicast-tv Global Configuration mode
command to define the Multicast IP addresses that are associated with a
Multicast TV VLAN. Use the no form of this command to remove all
associations.
Syntax
ip igmp snooping vlan vlan-id multicast-tv ip-multicast-address [count
number ]
no ip igmp snooping vlan vlan-id multicast-tv ip-multicast-address [count
number ]
Parameters
• vlan-id —Specifies the VLAN
• ip-multicast-address —Multicast IP address
• count number —Configures multiple contiguous Multicast IP addresses. If
not specified, the default is 1. (Range: 1–256)
Default Configuration
No Multicast IP address is associated.
Command Mode
Global Configuration mode