Dell PowerEdge VRTX - Manual (Page 544)

544 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
Example 1 - The following example configures gi0/1 as an access port
(untagged layer 2) VLAN port.
console(config)# interface gi0/1
console(config-if)# switchport mode access
console(config-if)# switchport access vlan 2
Example 2 - The following example puts the port gi0/2 into private-vlan host
mode.
console(config)# interface gi0/2
console(config-if)# switchport mode private-vlan host
switchport access vlan
A port in access mode can be an untagged member of at most a single VLAN.
The switchport access vlan Interface Configuration command reassigns an
interface to a different VLAN than it currently belongs or assigns it to none,
in which case it is not a member of any VLAN.
The no form of this command to restore the default configuration.
Syntax
switchport access vlan { vlan-id | none}
no switchport access vlan
Parameters
• vlan-id —Specifies the VLAN to which the port is configured.
• none—Specifies that the access port cannot belong to any VLAN.
Default Configuration
The interface belongs to the Default VLAN.