Dell PowerEdge VRTX - Manual (Page 539)

VLAN Commands 539
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
No name is defined.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
The VLAN name must be unique.
Example
The following example assigns VLAN 19 the name Marketing.
console(config)# interface vlan 19
console(config-if)# name Marketing
switchport protected-port
Use the switchport protected-port Interface Configuration mode command
to isolate Unicast, Multicast, and Broadcast traffic at Layer 2 from other
protected ports on the same switch. Use the no form of this command to
disable protection on the port.
Syntax
switchport protected-port
no switchport protected-port
Parameters
N/A
Default Configuration
Unprotected
Command Mode
Interface (Ethernet, Port Channel) Configuration mode