Dell PowerEdge VRTX - Manual (Page 278)

278 RADIUS Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Radius.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
radius-server retransmit
Use the radius-server retransmit Global Configuration mode command to
specify the number of times the software searches the list of RADIUS server
hosts. Use the no form of this command to restore the default configuration.
Syntax
radius-server retransmit retries
no radius-server retransmit
Parameters
• retransmit retries —Specifies the number of retry retransmissions (Range:
1–15).
Default Configuration
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
Example
The following example configures the number of times the software searches
all RADIUS server hosts as 5.
console(config)# radius-server retransmit 5
radius-server host source-interface
Use the radius-server host source-interface Global Configuration mode
command to specify the source interface whose IPv4 address will be used as
the Source IPv4 address for communication with IPv4 RADIUS servers. Use
the no form of this command to restore the default configuration.
Syntax
radius-server host source-interface interface-id