Dell PowerEdge VRTX - Manual (Page 127)

Clock Commands 127
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Clock.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Global Configuration mode
Interface Configuration mode
User Guidelines
Use the sntp client enable command to enable SNTP Broadcast and Anycast
clients.
Example
The following example enables the SNTP Broadcast and Anycast clients on
VLAN 100:
console(config)# sntp client enable vlan 100
sntp client enable (Interface)
To enable the SNTP Broadcast and Anycast client on an interface, use the
sntp client enable Interface Configuration command. Use the no form of this
command to disable the SNTP client.
Syntax
sntp client enable
no sntp client enable
Parameters
N/A
Default Configuration
The SNTP client is disabled on an interface.
Command Mode
Interface Configuration mode
User Guidelines
This command enables the SNTP Broadcast and Anycast client on an
interface. Use the no form of this command to disable the SNTP client.