Dell PowerEdge VRTX - Manual (Page 129)

Clock Commands 129
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Clock.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables
polling for the SNTP predefined Unicast clients. Use the no form of this
command to disable the polling for the SNTP client.
Syntax
sntp unicast client poll
no sntp unicast client poll
Parameters
N/A
Default Configuration
Polling is disabled.
Command Mode
Global Configuration mode
User Guidelines
Polling time is configured with the sntp client poll timer Global
Configuration mode command.
Example
The following example enables polling for SNTP predefined unicast clients.
console(config)# sntp unicast client poll
sntp server
The sntp server Global Configuration mode command configures the device
to use the SNTP to request and accept Network Time Protocol (NTP) traffic
from a specified server (meaning to accept system time from an SNTP
server). Use the no form of this command to remove a server from the list of
SNTP servers.