Dell PowerEdge VRTX - Manual (Page 703)

IPv6 Commands 703
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IPv6_Router.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
IPv6 Address Age Link-layer Addr State Interface
Router
2000:0:0:4::2 0 0003.a0d6.141e REACH VLAN1
Yes
Field Descriptions:
• Total number of entries—Number of entries (peers) in the cache.
•
IPv6 Address—IPv6 address of neighbor or interface.
• Age—Time (in minutes) since the address was confirmed to be reachable.
A hyphen (-) indicates a static entry.
• Link-layer Addr—MAC address. If the address is unknown, a hyphen (-) is
displayed.
• Interface—Interface which the neighbor is connected to.
• Router—Specifies if the neighbor is a Router. A hyphen (-) is displayed for
static entries.
show ipv6 route
Use the show ipv6 route command in user EXEC or privileged EXEC mode
to display the current contents of the IPv6 routing table.
Syntax
show ipv6 route [ ipv6-address | ipv6-prefix/prefix-length | protocol |
interface interface-id ]
Parameters
• ipv6-address —Displays routing information for a specific IPv6 address.
This argument must be in the form documented in RFC4293 where the
address is specified in hexadecimal using 16-bit values between colons.
• ipv6-prefix —Displays routing information for a specific IPv6 network.
This argument must be in the form documented in RFC4293 where the
address is specified in hexadecimal using 16-bit values between colons.
• / prefix-length —The length of the IPv6 prefix. A decimal value that
indicates how many of the high-order contiguous bits of the address
comprise the prefix (the network portion of the address). A slash mark
must precede the decimal value.