Dell PowerEdge VRTX - Manual (Page 400)

400 Green Ethernet
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\750_Green_Ethernet.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
When the interface is set to enhanced mode, after the VCT length check has
completed and set the power to low, an active monitoring for errors is done
continuously. In the case of errors crossing a certain threshold, the PHY will
be reverted to long reach.
Note that EEE cannot be enabled if the Short-Reach mode is enabled.
Example
console(config)# interface gi0/1
console(config-if)# green-ethernet short-reach
green-ethernet short-reach force
Use the green-ethernet short-reach force Interface Configuration mode
command to force short-reach mode on a port. Use the no form of this
command to return to default.
Syntax
green-ethernet short-reach force
no green-ethernet short-reach force
Parameters
N/A
Default Configuration
Short-reach mode is not forced.
Command Mode
Interface (Ethernet) Configuration mode
Example
console(config)# interface gi0/1
console(config-if)# green-ethernet short-reach force