Dell PowerEdge VRTX - Manual (Page 653)

Template Last Updated - 2/7/2007 DHCPv6 Commands 653
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
39
DHCPv6 Commands
ipv6 dhcp client stateless
Use the ipv6 dhcp client stateless command in Interface Configuration mode
to enable DHCP for an IPv6 client process and to enable request for stateless
configuration through the interface on which the command is run. To disable
requests for stateless configuration, use the no form of this command.
Syntax
ipv6 dhcp client stateless
no ipv6 dhcp client stateless
Parameters
This command has no arguments or keywords.
Default Configuration
Information request is disabled on an interface.
Command Mode
Global Configuration mode
User Guidelines
Enabling this command starts the DHCPv6 client process if this process is
not yet running and IPv6 interface is enabled on the interface.
This command enables the DHCPv6 Stateless service on the interface. The
service allows to receive the configuration from a DHCP server, passed in the
following options:
• Option 23: OPTION_DNS_SERVERS - List of DNS Servers IPv6
Addresses
• Option 24: OPTION_DOMAIN_LIST - Domain Search List
• Option 31: OPTION_SNTP_SERVERS - List of SNTP Servers IPv6
Addresses