Dell PowerEdge VRTX - Manual (Page 709)

IPv6 Tunnel Commands 709
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Tunnel New Edition.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Parameters
• number —Specifies the number router solicitation refresh messages that
the device sends. (Range: 1–20).
Default Configuration
The default number of router solicitation refresh messages that the device
sends is 3.
Command Mode
Global Configuration mode
User Guidelines
The router solicitation interval (when there is an active ISATAP router) is the
minimum-router-lifetime that is received from the ISATAP router, divided by
(Robustness + 1).
Example
The following example sets the number of router solicitation refresh messages
that the device sends to 5.
console(config)# tunnel isatap robustness 5
tunnel isatap router
Use the tunnel isatap router Interface Configuration (Tunnel) mode
command to configure a global string that represents a specific automatic
tunnel router domain name. Use the no form of this command to remove this
router name and restore the default configuration.
Syntax
tunnel isatap router router-name
no tunnel isatap router
Parameters
• router-name —Specifies the router’s domain name.