Dell PowerEdge VRTX - Manual (Page 388)

388 EEE Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\EEE.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
eee enable (interface)
Use the eee enable Interface Configuration command to enable the EEE
mode on an Ethernet port. Use the no format of the command to disable the
mode.
Syntax
eee enable
no eee enable
Parameters
N/A
Default Configuration
EEE is enabled.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
If auto-negotiation is not enabled on the port and its speed is 1 Giga, the EEE
operational status is disabled.
Example
console(config)# interface gi0/1
console(config-if)# eee enable
eee lldp enable
Use the eee lldp enable Interface Configuration command to enable EEE
support by LLDP on an Ethernet port. Use the no format of the command to
disable the support.
Syntax
eee lldp enable