Dell PowerEdge VRTX - Manual (Page 173)

SNMP Commands 173
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
Defines a password tom for the group abcd that enables this group to access
the management station 1.1.1.121 with prefix 8.
console(config)# snmp-server community-group tom abcd 1.1.1.122
prefix 8
snmp-server source-interface
To specify the interface from which a Simple Network Management Protocol
(SNMP) trap originates the informs or traps, use the snmp-server source-
interface command in Global Configuration mode. To returned to the
default, use the no form of this command.
Syntax
snmp-server source-interface {traps | informs} interface-id
no snmp-server source-interface [traps | informs]
Parameters
• traps—Specifies the SNMP traps interface.
•
informs—Specifies the SNMP informs.
• interface-id —Specifies the source interface.
Default Configuration
The source IPv4 address is the IPv4 address defined on the outgoing interface
and belonging to next hop IPv4 subnet.
If no parameters are specified in no snmp-server source-interface, the default
is both traps and informs.
Command Mode
Global Configuration mode
User Guidelines
If the source interface is the outgoing interface, the interface IP address
belonging to next hop IPv4 subnet is applied.