Dell PowerEdge VRTX - Manual (Page 375)

Ethernet Configuration Commands 375
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Privileged EXEC mode
Example
The following example displays the description of all configured interfaces.
show interfaces counters
Use the show interfaces counters Privileged EXEC mode command to display
traffic seen by all the physical interfaces or by a specific interface.
Syntax
show interfaces counters [interface-id | detailed ]
Parameters
• interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
• detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Display counters for all interfaces. If detailed is not used, only present ports
are displayed.
console# show interfaces description
Port
gi0/ 1
gi0/ 2
gi0/ 3
gi0/ 4
Descriptions
---------------------------------------------
Port that should be used for management only
PO
----
Po1
Description
-----------
Output