Ip dhcp relay address (interface) – Dell PowerEdge VRTX User Manual
Page 647

DHCP Relay Commands
647
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DCHP_Relay.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Syntax
ip dhcp relay address
ip-address
no ip dhcp relay address [
ip-address
]
Parameters
•
ip-address
—Specifies the DHCP server IP address. Up to 8 servers can be
defined.
Default Configuration
No server is defined.
Command Mode
Global Configuration mode
User Guidelines
Use the ip dhcp relay address command to define a global DHCP Server IP
address. To define a few DHCP Servers, use the command a few times.
To remove a DHCP Server, use the no form of the command with the
ip-
address
argument.
The no form of the command without the
ip-address
argument deletes all
global defined DHCP servers.
Example
The following example defines the DHCP server on the device.
console(config)# ip dhcp relay address 176.16.1.1
ip dhcp relay address (Interface)
Use the ip dhcp relay address Interface Configuration (VLAN, Ethernet,
Port-channel) command to define the DHCP servers available by the DHCP
relay for DHCP clients connected to the interface. Use the no form of this
command to remove the server from the list.
Syntax
ip dhcp relay address
ip-address