Dell PowerEdge VRTX - Manual (Page 772)

772 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
show qos aggregate-policer
Use the show qos aggregate-policer EXEC mode command to display
aggregate policers
This command is only available in QoS advanced mode.
Syntax
show qos aggregate-policer [ aggregate-policer-name ]
Parameters
aggregate-policer-name—Specifies the aggregate policer name.
Default Configuration
All policers are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the parameters of the aggregate policer called
Policer1.
console(config)# show qos aggregate-policer policer1
aggregate-policer policer1 96000 4800 exceed-action drop
not used by any policy map
police aggregate
Use the police aggregate Policy-map Class Configuration mode command to
apply an aggregate policer to multiple class maps within the same policy map.
Use the no form of this command to remove an existing aggregate policer
from a policy map.
This command is only available in QoS advanced mode.
Syntax
police aggregate aggregate-policer-name