Dell PowerEdge VRTX - Manual (Page 169)

Template Last Updated - 2/7/2007 SNMP Commands 169
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
11
SNMP Commands
snmp-server server
Use the snmp-server server Global Configuration mode command to enable
the device to be configured by the SNMP protocol. Use the no form of this
command to disable this function.
Syntax
snmp-server server
no snmp-server server
Parameters
N/A
Default Configuration
Enabled
Command Mode
Global Configuration mode
Example
console(config)# snmp-server server
snmp-server community
Use the snmp-server community Global Configuration mode command to
set the community access string (password) that permits access to SNMP
commands (v1 and v2). This is used for SNMP commands, such as GETs and
SETs.
This command configures both SNMP v1 and v2.
Use the no form of this command to remove the specified community string.