Dell PowerEdge VRTX - Manual (Page 584)

584 IGMP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Parameters
• vlan-id —Specifies the VLAN.
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
IGMP snooping can be enabled only on static VLANs.
IGMPv1, IGMPv2, and IGMPv3 Snooping are supported.
To activate IGMP snooping, bridge multicast filtering must be enabled by the
bridge multicast filtering command.
The user guidelines of the bridge multicast mode command describes the
configuration that is written into the FDB as a function of the FDB mode
and the IGMP version that is used in the network.
Example
console(config)# ip igmp snooping vlan 2
ip igmp snooping vlan mrouter
Use the ip igmp snooping vlan mrouter Global Configuration mode
command to enable automatic learning of Multicast router ports on a VLAN.
Use the no form of this command to remove the configuration.
Syntax
ip igmp snooping vlan vlan-id mrouter learn pim-dvmrp
no ip igmp snooping vlan vlan-id mrouter learn pim-dvmrp
Parameters
• vlan-id —Specifies the VLAN.