Dell PowerEdge VRTX - Manual (Page 474)

474 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
• data—Specifies the location data in the format defined in ANSI/TIA 1057:
dotted hexadecimal data: Each byte in a hexadecimal character string is
two hexadecimal digits. Bytes are separated by a period or colon. (Length:
coordinate: 16 bytes. Civic-address: 6-160 bytes. Ecs-elin: 10-25 bytes)
Default Configuration
The location is not configured.
Command Mode
Interface (Ethernet) Configuration mode
Example
The following example configures the LLDP MED location information on
gi0/2 as a civic address.
console(config)# interface gi0/2
console(config-if)# lldp med location civic-address
616263646566
lldp chassis-id
Use the lldp chassis-id Global Configuration mode command to configure
the source of the chassis ID of the port. Use the no form of this command to
restore the chassis ID source to default.
Syntax
lldp chassis-id {mac-address | host-name}
no lldp chassis-id
Parameters
• mac-address—Specifies the chassis ID to use the device MAC address.
•
host-name—Specifies the chassis ID to use the device configured host
name.
Default Configuration
MAC address.