Dell PowerEdge VRTX - Manual (Page 486)

486 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Operational MAU type The port MAU type.
LLDP MED
Capabilities
The sender's LLDP-MED capabilities.
Device type The device type. Indicates whether the sender is a
Network Connectivity Device or Endpoint Device, and
if an Endpoint, to which Endpoint Class it belongs.
LLDP MED - Network Policy
Application type
The primary function of the application defined for
this network policy.
Flags Flags. The possible values are:
Unknown policy: Policy is required by the device, but is
currently unknown.
Tagged VLAN: The specified application type is using a
tagged VLAN.
Untagged VLAN: The specified application type is
using an Untagged VLAN.
VLAN ID The VLAN identifier for the application.
Layer 2 priority The Layer 2 priority used for the specified application.
DSCP The DSCP value used for the specified application.
LLDP MED - Power Over Ethernet
Power type
The device power type. The possible values are: Power
Sourcing Entity (PSE) or Power Device (PD).
Power Source The power source utilized by a PSE or PD device. A
PSE device advertises its power capability. The possible
values are: Primary power source and Backup power
source. A PD device advertises its power source. The
possible values are: Primary power, Local power,
Primary and Local power.
Power priority The PD device priority. A PSE device advertises the
power priority configured for the port. A PD device
advertises the power priority configured for the device.
The possible values are: Critical, High and Low.
Field Description