Dell PowerEdge VRTX - Manual (Page 668)

668 IP Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Addressing_MeS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
The ip default-gateway command adds the default route with metric of 1 for
the gateway connected on an In-Band interface and 1 for the gateway
connected on OOB.
Use the no ip default-gateway
ip-address command to delete one default
gateway.
Use the no ip default-gateway command to delete all default gateways.
Example
The following example defines default gateway 192.168.1.1.
console(config)# ip default-gateway 192.168.1.1
show ip interface
Use the show ip interface EXEC mode command to display the usability
status of configured IP interfaces.
Syntax
show ip interface [i nterface-id ]
Parameters
• interface-id —Specifies an interface ID on which IP addresses are defined.
Default Configuration
All IP addresses.
Command Mode
User EXEC mode
Examples
Example 1 - The following example displays all configured IP addresses and
their types: