Dell PowerEdge VRTX - Manual (Page 817)

MLD Snooping Commands 817
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\MLD_Snooping.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
User Guidelines
Multicast router ports can be configured statically with the bridge multicast
forward-all command.
You can execute the command before the VLAN is created.
Example
console(config)# ipv6 mld snooping vlan 1 mrouter learn
pim-dvmrp
ipv6 mld snooping vlan mrouter interface
Use the ipv6 mld snooping mrouter interface Global Configuration mode
command to define a port that is connected to a Multicast router port. Use
the no form of this command to remove the configuration.
Syntax
ipv6 mld snooping vlan vlan-id mrouter interface interface-list
no ipv6 mld snooping vlan vlan-id mrouter interface interface-list
Parameters
• vlan-id —Specifies the VLAN.
• interface-list —Specifies a list of interfaces. The interfaces can be from one
of the following types: port or port-channel.
Default Configuration
No ports defined
Command Mode
Global Configuration mode
User Guidelines
This command may be used in conjunction with the bridge multicast
forward-all command, which is used in older versions to statically configure a
port as a Multicast router.