Dell PowerEdge VRTX - Manual (Page 381)

Ethernet Configuration Commands 381
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
console(config)# interface gi0/1
console(config-if)# storm-control include-multicast
show storm-control
Use the show storm-control Privileged EXEC mode command to display the
configuration of storm control for all ports or for a specific one.
Syntax
show storm-control [interface-id | detailed ]
Parameters
• interface-id—Specifies an Ethernet port.
•
detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Display for all interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
Privileged EXEC mode
User Guidelines
Use the storm-control broadcast enable Interface Configuration command to
enable storm control.
The calculated rate includes the 20 bytes of Ethernet framing overhead
(preamble+SFD+IPG).
If the suppression level in percentage is translated to a rate that is lower than
the minimum rate, the minimum rate is set.
Example
console# show storm-control