Dell PowerEdge VRTX - Manual (Page 351)

802.1X Commands 351
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
For BPDU messages whose MAC addresses are not the supplicant MAC
address are not discarded in Protect mode.
BPDU message whose MAC addresses are not the supplicant MAC address
cause a shutdown in Shutdown mode.
Example
console(config)# interface gi0/1
console(config-if)# dot1x violation-mode protect
show dot1x
Use the show dot1x Privileged EXEC mode command to display the 802.1X
interfaces or specified interface status.
Syntax
show dot1x [interface interface-id | detailed]
Parameters
• interface-id —Specify an Ethernet port.
• detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Display for all ports. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
Examples
The following example displays authentication information for all interfaces
of the switch supporting the full multi-sessions mode:
console# show dot1x
Authentication is enabled
Authenticating Servers: Radius, None