Dell PowerEdge VRTX - Manual (Page 287)

TACACS+ Commands 287
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\TACACS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Parameters
• key-string —Specifies the authentication and encryption key for all
TACACS+ communications between the device and the TACACS+
server. This key must match the encryption used on the TACACS+
daemon. (Length: 0–128 characters)
Default Configuration
The default key is an empty string.
Command Mode
Global Configuration mode
Example
The following example sets Enterprise as the authentication key for all
TACACS+ servers.
console(config)# tacacs-server key enterprise
tacacs-server timeout
Use the tacacs-server timeout Global Configuration mode command to set
the interval during which the device waits for a TACACS+ server to reply.
Use the no form of this command to restore the default configuration.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
Parameters
• timeout —Specifies the timeout value in seconds. (Range: 1-30).
Default Configuration
The default timeout value is 5 seconds.
Command Mode
Global Configuration mode