Dell PowerEdge VRTX - Manual (Page 658)

658 DHCPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DHCPv6.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
no ipv6 dhcp duid-en
Parameters
• enterprise-number —The vendor’s registered Private Enterprise number as
maintained by IANA.
• identifier —The vendor-defined non-empty hex string (up to 64 hex
characters). If the number of the character is not even ’0’ is added at the
right. Each 2 hex characters can be separated by a period or colon.
Default Configuration
DUID Based on Link-layer Address (DUID-LL) is used. The base MAC
Address is used as a Link-layer Address.
Command Mode
Global Configuration mode
User Guidelines
By default, the DHCPv6 uses the DUID Based on Link-layer Address (see
RFC3315) with the Base MAC Address as a Link-layer Address.
Use this command to change the UDID format to the Vendor Based on
Enterprise Number.
Example
Example 1. The following sets the DIID-EN format:
console(config)# ipv6 dhcp udid-en 9 0CC084D303000912
Example 2. The following sets the DIID-EN format using colons as delimiter:
console(config)# ipv6 dhcp udid-en 9 0C:C0:84:D3:03:00:09:12