Dell PowerEdge VRTX - Manual (Page 54)

54 User Interface Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\User_Interface.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Default Configuration
The default command history buffer size is 10 commands.
Command Mode
Line Configuration Mode
User Guidelines
This command configures the command history buffer size for a particular
line. It is effective from the next time that the user logs in via
console/telnet/ssh.
Use the
terminal history size User EXEC mode command to configure the
command history buffer size for the current terminal session.
The allocated command history buffer is per terminal user, and is taken from
a shared buffer. If there is not enough space available in the shared buffer, the
command history buffer size cannot be increased above the default size.
Example
The following example changes the command history buffer size to 100
entries for Telnet.
console(config)# line telnet
console(config-line)# history size 100
terminal history
The terminal history User EXEC mode command enables the command
history function for the current terminal session, meaning it is not stored in
the Running Configuration file. Use the no form of this command to disable
the command.
Syntax
terminal history
terminal no history