Dell PowerEdge VRTX - Manual (Page 604)

604 IGMP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
ip igmp query-max-response-time
To configure the maximum response time advertised in Internet Group
Management Protocol (IGMP) queries, use the ip igmp query-max-response-
time command in interface configuration mode. To restore the default value,
use the no form of this command.
Syntax
ip igmp query-max-response-time seconds
no ip query-max-response-time
Parameters
• seconds —Maximum response time, in seconds, advertised in IGMP
queries. (Range: 0–31744)
Default Configuration
10 seconds.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
This command controls the period during which the responder can respond
to an IGMP query message before the router deletes the group.
This command controls how much time the hosts have to answer an IGMP
query message before the router deletes their group. Configuring a value of
fewer than 10 seconds enables the router to prune groups faster.
The maximum query response time must be less than the query interval.
Note. If the hosts do not respond fast enough, they might be pruned
inadvertently. Therefore, the hosts must know to respond faster than 10
seconds (or the value you configure).