Dell PowerEdge VRTX - Manual (Page 702)

702 IPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IPv6_Router.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
• ipv6-address —Specifies the IPv6 address of the neighbor. This argument
must be in the form documented in RFC4293 where the address is
specified in hexadecimal using 16-bit values between colons.
• ipv6-hostname —Specifies the IPv6 host name of the remote networking
device.
Default Configuration
All IPv6 ND cache entries are listed.
Command Mode
User EXEC mode
Privileged EXEC mode
User Guidelines
When the interface-id argument is not specified, cache information for all
IPv6 neighbors is displayed. Specifying the interface-id argument displays
only cache information about the specified interface.
Example
Example 1. The following is sample output from the show ipv6 neighbors
command when entered with an interface-id:
console# show ipv6 neighbors vlan 1
IPv6 Address Age Link-layer Addr State Interface
Router
2000:0:0:4::2 0 0003.a0d6.141e REACH VLAN1
Yes
3001:1::45a - 0002.7d1a.9472 REACH VLAN1
-
FE80::203:A0FF:FED6:141E 0 0003.a0d6.141e REACH VLAN1
No
Example 2. The following is sample output from the show ipv6 neighbors
command when entered with an IPv6 address:
console# show ipv6 neighbors 2000:0:0:4::2