Spanning-tree disable – Dell PowerEdge VRTX User Manual
Page 496

496
Spanning-Tree Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Spanning-Tree.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
The switch with the lowest priority is the root of the spanning tree. When
more than one switch has the lowest priority, the switch with the lowest MAC
address is selected as the root.
Example
The following example configures the spanning-tree priority to 12288.
console(config)# spanning-tree priority 12288
spanning-tree disable
Use the spanning-tree disable Interface (Ethernet, Port Channel)
Configuration mode command to disable the spanning tree on a specific port.
Use the no form of this command to enable the spanning tree on a port.
Syntax
spanning-tree disable
no spanning-tree disable
Parameters
N/A
Default Configuration
Spanning tree is enabled on all ports.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example disables the spanning tree on gi0/4
console(config)# interface gi0/4
console(config-if)# spanning-tree disable