Dell PowerEdge VRTX - Manual (Page 724)

724 ACL Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
permit ( IP )
Use the permit IP Access-list Configuration mode command to set permit
conditions for an IPv4 access list (ACL). Permit conditions are also known as
access control entries (ACEs). Use the no form of the command to remove
the access control entry.
Syntax
permit protocol {any | source source-wildcard} {any | destination
destination-wildcard} [dscp number | precedence number] [ time-range
time-range-name]
[log-input]
permit icmp {any | source source-wildcard} {any | destination destination-
wildcard} [any | icmp-type] [any | icmp-code]] [dscp number | precedence
number] [ time-range time-range-name]
[log-input]
permit igmp {any | source source-wildcard} {any | destination destination-
wildcard}[igmp-type] [dscp number | precedence number] [ time-range
time-range-name]
[log-input]
permit tcp {any | source source-wildcard} {any|source-port/port-range}{any
| destination destination-wildcard} {any|destination-port/port-range} [dscp
number | precedence number] [match-all list-of-flags] [ time-range time-
range-name]
[log-input]
permit udp {any | source source-wildcard} {any|source-port/port-range}
{any | destination destination-wildcard} {any|destination-port/port-range}
[dscp number | precedence number] [ time-range time-range-name]
[log-input]
no permit protocol {any | source source-wildcard} {any | destination
destination-wildcard} [dscp number | precedence number][ time-range time-
range-name]
[log-input]