Dell PowerEdge VRTX - Manual (Page 623)

Template Last Updated - 2/7/2007 DHCP Snooping Commands 623
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
37
DHCP Snooping Commands
ip dhcp snooping
Use the ip dhcp snooping Global Configuration mode command to enable
Dynamic Host Configuration Protocol (DHCP) Snooping globally. Use the
no form of this command to restore the default configuration.
Syntax
ip dhcp snooping
no ip dhcp snooping
Parameters
N/A
Default Configuration
DHCP snooping is disabled.
Command Mode
Global Configuration mode
User Guidelines
For any DHCP Snooping configuration to take effect, DHCP Snooping must
be enabled globally. DHCP Snooping on a VLAN is not active until DHCP
Snooping on a VLAN is enabled by using the ip dhcp snooping vlan Global
Configuration mode command.
Example
The following example enables DHCP Snooping on the device.
console(config)# ip dhcp snooping