Dell PowerEdge VRTX - Manual (Page 329)

802.1X Commands 329
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Syntax
dot1x guest-vlan
no dot1x guest-vlan
Parameters
N/A
Default Configuration
No VLAN is defined as a guest VLAN.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
Use the dot1x guest-vlan enable command to enable unauthorized users on an
interface to access the guest VLAN.
A device can have only one global guest VLAN.
The guest VLAN must be a static VLAN and it cannot be removed.
The Default VLAN cannot be configured as guest VLAN.
An unauthorized VLAN cannot be configured as guest VLAN.
The guest VLAN cannot be configured on a monitoring port.
Example
The following example defines VLAN 2 as a guest VLAN.
console(config)# interface vlan 2
console(config-if)# dot1x guest-vlan
dot1x guest-vlan enable
Use the dot1x guest-vlan enable Interface Configuration mode command to
enable unauthorized users on the access interface to the guest VLAN. Use the
no form of this command to disable access.