Dell PowerEdge VRTX - Manual (Page 665)

IP Addressing Commands 665
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Addressing_MeS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
console(config-if)# ip address 131.108.1.27 255.255.255.0
Example 2. The following example configures 3 overlapped IP addresses.
console(config)# interface vlan 1
console(config-if)# ip address 1.1.1.1 255.0.0.0
console(config)# exit
console(config)# interface vlan 2
console(config-if)# ip address 1.2.1.1 255.255.0.0
console(config)# This IP address overlaps IP address
1.1.1.1/8 on vlan1, are you sure? [Y/N]Y
console(config)# exit
console(config)# interface vlan 3
console(config-if)# ip address 1.3.1.1 255.255.0.0
console(config)# This IP address overlaps IP address
1.1.1.1/8 on vlan1, are you sure? [Y/N]Y
console(config)# exit
Example 3. The following example configures IP address on OOB:
console(config)# interface oob
console(config-if)# ip address 131.108.1.27
255.255.255.0 default-gateway 131.108.1.100
ip address dhcp
Use the ip address dhcp Interface Configuration (Ethernet, VLAN, Port-
channel) mode command to acquire an IP address for an Ethernet interface
from the Dynamic Host Configuration Protocol (DHCP) server. Use the no
form of this command to release an acquired IP address.
Syntax
ip address dhcp
no ip address dhcp